Description
Schluter Ditra-XL Membrane
Schluter DITRA XL Membrane is a uncoupling and waterproofing membrane that is recommended for any even and load-bearing substrate such as: plywood and OSB; 24" o.c. truss and I-joist systems; green concrete; gypsum-based screeds; pre-stressed and post-tensioned concrete; and radiant-heated floors. For most tile installations, Schluter DITRA XL eliminates the need for a second layer of plywood or for the use of the cementitious backer-board. Schluter DITRA XL ensures a lasting installation by allowing independent movement between the tile covering and the substrate. This eliminates the transfer of stresses from the substrate to the tile covering. In addition, These Schluter-DITRA Membrane is lighter, thinner, and easier to apply than any other underlayment.
Features:
- Exclusively designed for ceramic and stone tile surfaces
- Neutralizes stress between the subfloor and tile surface, eliminating the main cause of cracking
- Waterproofs and allows moisture in the substrate to evaporate
- Allows ceramic tile installations over single-layer plywood (at least 5/8" thick over to 16" o.c floor joists), eliminating the need for a second sheet of plywood or backer-board
- Ideal for interior and exterior tile and stone installations
Size:
- 5/16" x 3' 3" (175 sq. ft.)
