null
Need Help? 888-965-6577 x510

StoneTech Enhancer Pro Sealer

StoneTech Professional

14 reviews Write a Review
SKU:
30.44200
MPN:
ST304-1216
$43.40

Description

StoneTech Enhancer Pro Sealer

THE 1 AND 5 GALLON SIZE ARE VOC RESTRICTED AND CANNOT SHIP TO A CALIFORNIA ADDRESS. CLICK HERE FOR MORE INFO

StoneTech Professional Enhancer Pro Sealer provides heavy duty protection against tough oil and water-based stains. This solvent-based product will also enrich the color of your natural stone. StoneTech Enhancer Pro Sealer is ideal for use on natural stone such as limestone, slate, travertine, sandstone, flagstone, tumbled stone, flamed stone & textured stone, masonry & concrete.

To maintain your stone’s natural beauty, clean surface as needed with StoneTech Revitalizer Cleaner and Protector or Stone & Tile Cleaner.

Features and Benefits:

  • Enriches color
  • Heavy duty protection against most stains
  • Solvent-based, interior & exterior applications

For Professional Use Only

For an easier-to-use, water-based technology we recommend StoneTech Enhancer Sealer.

Where to Use:

  • Limestone
  • Slate
  • Travertine
  • Sandstone
  • Flagstone
  • Tumbled stone
  • Flamed stone 
  • Textured stone
  • Masonry 
  • Concrete

Expected Wear:

3 - 5 years

Coverage:

  • Pint: 20 - 55 sq ft
  • Quart: 40 - 115 sq ft
  • Gallon*: 150 - 450 sq ft (VOC Restricted)
  • 5 Gallon*: 750 - 2,250 sq ft (VOC Restricted)


Directions:

Read entire label before using StoneTech Enhancer Pro Sealer. Use only as directed. Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, free of waxes, coatings, and previous sealers, and is dry for 24–72 hours.

Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children and pets out of the area until foot traffic resumes.

1. Mask off any surfaces not intended to be treated.
2. Liberally apply an even coat using a paint pad, roller, brush, or pump-up garden sprayer. Do not use a power sprayer, towel, or sponge for application. Do not thin before using. See Method of Application for more instructions.
3. Allow StoneTech Enhancer Pro Sealer to penetrate surface for 15–20 minutes. Denser material may require more time to penetrate. DO NOT ALLOW EXCESS SEALER TO DRY ON SURFACE. Failure to remove excess sealer from surface may result in residue that may need to be mechanically removed.
4. Thoroughly wipe surface with multiple dry cloths to remove all excess sealer.
5. A second coat may be needed for more absorbent surfaces. If darker appearance is required, StoneTech Enhancer Pro Sealer should be applied one hour after initial application, as directed in steps 2–4.
6. Full cure is achieved after 24–72 hours. Avoid foot traffic for 6–8 hours after application. If foot traffic must resume sooner, cover the floor with red rosin paper to protect it until full cure has been achieved. Red rosin paper is not needed to apply second coat.
7. Clean equipment with mineral spirits. Rags and equipment that are wet with product may be flammable. Clean up promptly after job is complete. Clean equipment with mineral spirits and allow to dry in a well-ventilated area. Allow rags to dry in a well-ventilated area out of reach of children and pets. When dry, dispose of in accordance with local waste disposal regulations .

Method of Application:

For small jobs, use a paint pad, roller, or brush. For larger jobs, use a pump-up garden sprayer available at your local garden center, hardware store, or home improvement center. Do not use a power sprayer with StoneTech Enhancer Pro Sealer. Power sprayers create a significant amount of overspray, resulting in wasted product and the need for additional clean-up.

A pump-up garden sprayer will reduce the potential for over-exposure to vapors and produce better results. Ensure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets out of the area until foot traffic resumes.


StoneTech Enhancer Pro Sealer Technical Data Sheet
StoneTech Enhancer Pro Sealer Safety Data Sheet
25 Year LATICRETE STONETECH Product Warranty (English)

Extra Information

Brand:
StoneTech Professional
30.44200:
ST304-1216
30.42800:
ST304-0632
30.20000:
ST304-0401
30.00140:
ST304-0105

    14 Reviews

  • Posted by Mike X. on Dec 29, 2022

    5

    Put Great Finish on Slate Floor

    We have a slate floor in the kitchen. It has been there for many years. We recently did a remodeling, and add a few new slate tiles that was looked visibly newer and lighter color. After cleaning, we apply this Enhance Pro Sealer, the result is a unified colored, beautiful looking slate floor. I cannot be more happier.

  • Posted by Brett Johnson on Dec 29, 2022

    5

    Good Customer Service

    Nice People, Delivered on time. Thanks for the Color Enhancer Pro !!!

  • Posted by John Miller on Dec 29, 2022

    5

    StoneTech Enhancer Pro

    Great product. Our Indian flagstone walkway looks like new. Easy to use. Just wish the product was not so expensive, however I could not find similar products for much less and I trust the DuPont name.

  • Posted by THOMAS ROBERTS on Dec 29, 2022

    5

    StoneTech Professional Enhancer Pro

    Purchased this product to seal newly installed travertine tile. The sealer went on with ease and enhanced the appearance of the tile as advertised. The only complaint is that the instructions inside the flap were blurred and are not readable. Excellent product though and is highly recommended.

  • Posted by Chuck on Dec 29, 2022

    5

    Using Professional Enhancer Pro

    Worked as advertized, enhansed travertine look very nice.