Description
Overview
Stain-Proof Porcelain & Quartz Sealer is designed for the fine surface pores of porcelain tile and man-made quartz. Its invisible, non-film-forming treatment improves resistance to water- and oil-based staining without turning the surface into a coated finish.
Features
- Formulated for very low-absorption porcelain and quartz surfaces.
- Does not change the surface’s coefficient of friction.
- Protection is designed to withstand suitable commercial cleaning.
Specifications
- Container: 1 quart
- Finished, grouted surfaces / quartz countertops: Approximately 400–500 sq. ft. per quart for one coat
- Pre-sealing plus post-grout treatment: Approximately 200–300 sq. ft. per quart for the two-stage process
- Application temperature: 40–95°F
- Manufacturer warranty: 10 years when applied by an accredited applicator and maintained as specified; written terms apply
Downloads
- Stain-Proof Porcelain & Quartz Sealer Specification Sheet
- Product Uses And Porosity Chart
- Dry-Treat Product Selector Flyer
Applications
Use on suitable polished, honed or textured porcelain and man-made quartz, including tiled surfaces and quartz countertops. For a tile installation, distinguish pre-grout protection from treatment after grout has cured; these are different application stages and coverage rates.
Selection and Use
- Test a small area and assess after 24 hours, because some surfaces can lighten or darken. Apply to clean, dry material without thinning.
- Wet the surface to a mirror-like appearance for about 30 seconds. At approximately 20 minutes, before the product dries, polish away all unabsorbed sealer.
- When pre-sealing tile, allow at least 24 hours before grouting. For the final treatment, first allow grout to cure according to its manufacturer.
- Protect from moisture for at least 6 hours. Sealing does not prevent acid etching, scuffs or physical wear; follow the flammable-liquid precautions.
