Description
Overview
SPEC MIX Scratch & Brown Fiber Reinforced Stucco is an 80 lb preblended basecoat mix for traditional three-coat stucco wall systems. It combines cementitious materials, graded aggregates, additives and alkali-resistant fibers for the scratch coat, brown coat or both.
Features
- Factory-controlled proportions support consistent workability.
- Fiber reinforcement helps improve flexural strength and reduce cracking and crazing.
- Graded sand supports application and finishing.
- Formulated to meet ASTM C926 requirements.
Specifications
- Bag: 80 lb
- Coat: Scratch and/or brown basecoat
- System: Three-coat stucco
- Reinforcement: Alkali-resistant fibers
- Approximate coverage at 3/8 in.: 20–24 sq. ft.
- Approximate coverage at 1/2 in.: 15–18 sq. ft.
- Approximate coverage at 3/4 in.: 10–12 sq. ft.
Applications
Use as a basecoat for non-load-bearing exterior stucco veneer or interior finishes over suitable concrete, masonry or correctly prepared framed wall assemblies. Framed systems may include fiberboard, gypsum or wood-based sheathing when installed as part of the required lath and wall assembly.
Selection and Use
- Follow ASTM C926, applicable codes and the project requirements for lath, flashing, weather-resistive barriers and substrate preparation.
- Coverage is an estimate and changes with thickness, workmanship, surface condition and waste.
- This is a scratch/brown basecoat, not a substitute for the specified finish coat.
- Keep bags dry, covered and protected from damage; follow the manufacturer’s mixing and curing procedures for the entire wall system.