Description
Overview
PMP Spec Concrete Mix 5000 PLUS is a bagged concrete mix for structural and non-structural placements more than 2 inches thick. The 60 lb bag yields approximately 0.45 cubic foot for planning smaller pours or bagged deliveries.
Features
- Factory-proportioned bagged concrete for jobsite mixing.
- High-strength formulation for specified concrete work.
Specifications
- Package: 60 lb bag
- Approximate mixed yield: 0.45 cu. ft. per bag
- Placement thickness: More than 2 in. (50 mm)
- 28-day compressive strength: Exceeds 5,000 PSI at 2–3 in. slump
- Manufacturer-listed standard: Exceeds ASTM C387 compressive-strength requirements
Downloads
Applications
Use for foundation walls, sidewalks, footings, patios, steps and driveways where the project calls for this mix. Confirm the structural design, thickness and reinforcement separately; a concrete mix is not a substitute for project engineering.
Selection and Use
- For a rectangular pour, calculate length (ft) × width (ft) × depth (in.) ÷ 12, then divide by 0.45 to estimate bags. Round up and allow for jobsite variation.
- The linked sheet starts with approximately 2.5 quarts (2.4 L) of clean water per 60 lb bag; follow the full mixing instructions to achieve the stated consistency.
- Consolidate into the forms and finish after surface water has evaporated and the mix is thumbprint-hard.
- Maintain moisture during curing for several days. Protect from freezing and rain for at least 24 hours.
- The sheet specifies air, mix and substrate temperatures of 40–90°F, with no rain forecast within 24 hours; contact the manufacturer for conditions outside that range.