null Skip to main content
Need Help? 888-965-6577 x510

PMP

PMP Maximum-Spec Lightweight Concrete Mix - Gray 80 lb

No reviews yet Write a Review
PMP MAXIMUM-SPEC Lightweight Concrete Mix is a bagged concrete mix for structural and non-structural placements more than 2 inches thick. Its lightweight formulation provides approximately 1 cubic foot of mixed concrete from an 80 lb bag. View full description
SKU:
40.00106
MPN:
04-201-80-00000
$17.95
  • Fast, Reliable Shipping
  • Expert Product Support
  • 30+ Years of Experience.
PMP Maximum-Spec Lightweight Concrete Mix - Gray 80 lb

Description

Overview

PMP MAXIMUM-SPEC Lightweight Concrete Mix is a bagged concrete mix for structural and non-structural placements more than 2" thick. Its lightweight formulation provides approximately 1 cubic foot of mixed concrete from an 80 lb bag.

Features

  • Factory-proportioned bagged concrete for jobsite mixing.
  • Formulated for higher strength and greater coverage than standard concrete mix.

Specifications

  • Package: 80 lb bag
  • Approximate mixed yield: 1 cu. ft. per bag
  • Placement thickness: More than 2 in. (50 mm)
  • Color: Gray
  • 28-day compressive strength: Exceeds 5,500 PSI at 4–5 in. slump
  • Manufacturer-listed standard: Exceeds ASTM C387 compressive-strength requirements

Downloads

Applications

Use for countertops, sidewalks, footings, patios, steps and driveways where the project calls for this mix. Confirm the structural design, thickness and reinforcement separately; a concrete mix is not a substitute for project engineering.

Selection and Use

  • For a rectangular pour, calculate length (ft) × width (ft) × depth (in.) ÷ 12, then divide by 1 to estimate bags. Round up and allow for jobsite variation.
  • The linked sheet starts with approximately 2.2 gallons (8.3 L) of clean water per 80 lb bag; follow the full mixing instructions to achieve the stated consistency.
  • Consolidate into the forms and finish after surface water has evaporated and the mix is thumbprint-hard.
  • Maintain moisture during curing for several days. Protect from freezing and rain for at least 24 hours.
  • The sheet specifies air, mix and substrate temperatures of 40–90°F, with no rain forecast within 24 hours; contact the manufacturer for conditions outside that range.

Extra Information

Brand:
PMP
40.00106:
04-201-80-00000

Shipping details

View full shipping policy (opens in a new tab)