Description
Overview
Quikrete FastSet All-Crete serves two jobs from one dry blend: a fluid, non-shrink grout for filling confined spaces and a thicker repair material for concrete patching. Adjusting the mixing water changes the working consistency, so select the grout or repair procedure before mixing.
The fast-setting formulation is useful where the installation must progress promptly. Its short working period calls for prepared substrates, ready forms and small enough batches to place without delay.
Specifications
- Bag weight: 55 lb
- Grout classification: ASTM C1107 non-shrink grout
- Repair classification: ASTM C928, Class R3
- Approximate yield: 0.53 cu. ft. fluid; 0.50 cu. ft. flowable; 0.48 cu. ft. repair consistency
- Setting time: Approximately 20–45 minutes; temperature and consistency affect timing
Applications
Use the grout procedure for anchor bolts, column bases, bearing plates and keyways. Use the repair procedure for suitable concrete floor and pavement patches.
Follow the manufacturer’s current instructions for surface preparation, water measurement, placement depth and curing. Grouting and repair mixes have different water and curing requirements; do not treat them as interchangeable. Allow for temperature-dependent working time.