Description
Overview
MVIS Pointing Mortar fills the visible joints in adhered stone, thin brick and manufactured masonry veneer. The factory blend of portland cement, graded aggregates and color-fast pigments mixes with water to form a dense, durable joint in the selected color.
Features
- For interior and exterior veneer work.
- Factory-blended pigments support consistent color.
- Part of the coordinated MVIS installation system.
Specifications
- Package: 50 lb
- Joint-width range: 3/16ā1-1/4 in. (5ā32 mm)
- Example coverage: Approximately 700ā750 linear ft. at a 3/8 in. wide x 1/4 in. deep joint; geometry changes yield
- Color: Bright White #44; Mushroom #39; Natural Gray #24; Latte #40; Raven #45
Downloads
Applications
Use for pointing joints around suitable adhered stone, thin brick, manufactured stone or tile veneer. This is the joint-finishing material, not the adhesive that bonds the veneer to the wall.
Plan Your Installation
- Choose the color from the actual listing options and test it with the veneer before pointing the entire area.
- Keep mixing and application conditions consistent; porous finishes may trap pigment and require special preparation.
- Estimate from joint length, width and depth rather than wall area alone. Do not acid-clean finished joints.
Common Planning Questions
Does pointing mortar waterproof the wall?
No. Provide the specified air/water barrier and other wall details separately.
