Description
Overview
HYDRO BAN XP is a single-component liquid waterproofing and crack-isolation membrane for tile assemblies, including specified steam-room installations. It can cure on substrates as cool as 35°F and changes from sage green to dark olive green as it cures, helping installers inspect coverage and readiness.
Features
- Fabric-free in the field, coves and corners when installed to the specified details.
- Protects against shrinkage and other non-structural cracks up to 1/8 in.
- Microban antimicrobial technology protects the membrane.
- Extra Heavy service rating under the Robinson floor test.
Specifications
- Approximate coverage: 1 gallon: 50 sq. ft.; 5 gallons: 250 sq. ft.
- Cured thickness: 0.020ā0.030 in. (0.5ā0.8 mm)
- Standards: Exceeds ANSI A118.10 and A118.12; ASTM E96-rated steam applications
- Application surface temperature: 35ā90°F (2ā32°C), maintained for 24 hours after installation
- Size: 1 Gallon; 5 Gallon
Downloads
Applications
Use in interior or exterior showers, steam showers/rooms, bathrooms, laundries, kitchens, food-processing areas, pools, fountains, spas, countertops and facades. Terrace and balcony applications are limited to spaces over unoccupied areas; this is not a primary roof membrane over occupied space.
Plan Your Installation
- Apply the specified two coats and thickness; repair pinholes or thin spots before covering.
- Flood-test timing begins after the final coat has fully cured and changed color: typically 2 additional hours at 70°F and 50% RH; at 35ā69°F, allow 24 hours after final cure. Cold or humid conditions may require longer.
- Flood-test before tiling. Do not interpret the 2-hour statement as permission to test two hours after starting application.
- Do not bond directly to OSB, particleboard, interior-glue plywood, luan, Masonite or hardwood.
Common Planning Questions
Can the color change alone establish flood-test readiness?
No. Observe the additional temperature-dependent waiting period after final cure, and follow the full data-sheet instructions.