Description
Overview
LevelQuik RS is a rapid-setting, high-flow self-leveling underlayment for smoothing and leveling floors before finish flooring. Its calcium-aluminate formula develops approximately 4,300 psi compressive strength at 28 days and accepts pours from a featheredge to 1-1/2 inches.
Features
- Controlled Cure Technology addresses excess-moisture problems associated with traditional underlayments.
- Reduced shrinkage and high early strength for faster flooring schedules.
- Low-prep installation on acceptable, properly cleaned and primed surfaces.
Specifications
- Package: 50 lb.
- Coverage at 1/8 in.: 46–48 sq. ft. per 50-lb. bag
- At 1/4 in.: 23–24 sq. ft.
- At 1/2 in.: 11.5–12 sq. ft.
- At 1 in.: 5.75–6 sq. ft.
- At 1-1/2 in.: 3.8–4 sq. ft.
Downloads
Applications
Use the RS version beneath tile, stone, carpet, wood, laminate or resilient flooring where a faster-setting leveling product is appropriate. It is intended for interior dry areas, with limited covered exterior entryway or porch use only as described by CUSTOM.
Selection and Use
- Choose the primer and preparation for concrete, gypsum, existing tile, terrazzo, plywood or OSB. Do not interpret low-prep as permission to pour on weak or contaminated material.
- Follow the metal-lath and support requirements for wood subfloors. Residential joists up to 24 inches on center are conditional on the complete specified assembly.
- Non-moisture-sensitive tile or stone may be installed after approximately 4 hours; other floor coverings after 16 hours. Temperature, humidity and flooring moisture limits govern readiness.
- Do not use as the final wear surface or where a drainage slope is required. For unusual substrates or exterior conditions, obtain the manufacturer’s assembly recommendation.
