Description
Overview
ARDEX V 1300 is a high-flow, pourable or pumpable underlayment for leveling and smoothing interior floors before a finish covering is installed. It is intended for dry interior spaces, not as an exposed wear surface or moisture-vapor barrier.
Features
- For approved, properly prepared concrete, wood, terrazzo and other suitable substrates.
- Variable water ratio within the specified range.
- Can be pumped with suitable equipment under ARDEX guidance.
Specifications
- Bag: 50 lb (22.7 kg)
- Water: 4-3/4–5-1/4 quarts per bag
- Coverage at 1/8 in.: Approximately 58 sq. ft. per bag
- Coverage at 1/4 in.: Approximately 29 sq. ft. per bag
- Average minimum thickness: 1/8 in.
- Maximum neat thickness: 2 in. in most applications; 1/4 in. over VB 100, 1/2 in. over P 82 or P 4
- Flow/working time: Approximately 10 minutes at 70°F
- Walkable: Approximately 2–4 hours
- 28-day compressive strength: Typical 5,500 psi
- 28-day flexural strength: Typical 1,000 psi
- VOC: 0 g/L, as listed
- Shelf life: 12 months unopened and properly stored
Downloads
Applications
Use as a base for appropriate interior floor coverings after substrate preparation, moisture evaluation and the prescribed priming. Select the primer and pour depth together: the primer can reduce the allowable thickness below the general 2 in. maximum.
Selection and Use
- Do not overwater. Coverage changes with surface profile, density and porosity.
- At 70°F, moisture-insensitive ceramic, quarry and porcelain tile can be installed after approximately six hours. Follow the covering-specific instructions for stone and other materials.
- For carpet, vinyl, rubber and linoleum at pours up to 3/8 in., the reference wait is 24 hours. Thicker pours and other coverings require the specified mat test after at least 24 hours. Cold or humid conditions extend drying.
- Correct leaks and other water entry first; this underlayment does not replace a moisture-control system.