Description
Overview
Triton Waterproof Membrane forms a continuous waterproof and vapor-resistant layer beneath tile on walls and floors. Its fleece surface bonds with the approved setting material, making it a practical choice for showers, wet rooms and steam-shower assemblies.
The 10-meter and 30-meter rolls share the same one-meter width and membrane construction. Select the roll length for the project area, allowing extra material for overlaps, cuts and detailing.
Specifications
- Roll width: 1 meter, approximately 39.4 inches
- 10-meter roll: 32.8 feet long; approximately 108 square feet
- 30-meter roll: 98.4 feet long; approximately 323 square feet
- Thickness: 0.45 mm
- Standard: ANSI A118.10 bonded waterproof membranes
- Quantity: One roll in the selected length
Downloads
Applications
Build a Continuous Barrier
Start with a clean, even, load-bearing substrate. The installation guide calls for primer on drywall, a 1/8-inch square-notch trowel and mortar appropriate for the substrate. Embed the membrane and work outward to remove air pockets, checking for full contact.
Complete the Details
Overlap membrane seams by at least 2 inches. Where that overlap cannot be achieved, use Triton Seam Tape. Complete plumbing penetrations, corners and transitions with the appropriate Triton Watertight System accessories. These accessories and setting materials are sold separately; a membrane roll alone does not complete the waterproofing assembly.