Description
Overview
Tenax Ager FS is a solvent-based color-enhancing impregnator for porous stone and suitable quartz agglomerates. It creates a wet-look effect while adding water and oil repellency, with the treated surface identified by Tenax as suitable for food contact.
Features
- Penetrating treatment leaves no intended surface film.
- Enhances color while retaining the material’s breathability.
- Suitable for indoor and outdoor use, including kitchen tops.
Specifications
- Container: 1 liter
- Appearance: Colorless to light-yellow liquid
- Application surface temperature: 10–30°C / 50–86°F; away from direct sunlight
- Repeat treatment: After approximately 20 minutes
- Protection development / floor traffic wait: 24 hours
- Shelf life: 24 months at 5–30°C under specified storage conditions
Downloads
- Tenax Ager FS Stone Enhancing Sealer Data Sheet
- Tenax Ager FS Stone Enhancing Sealer Safety Data Sheet
Applications
For marble, travertine, granite, other suitable natural stone and quartz agglomerates when an enhanced color is wanted. The food-contact suitability applies to material treated as directed; it is not a claim that the liquid sealer is safe to ingest.
Selection and Use
- Test absorption and final appearance on a small area first. Apply only to clean, dry material.
- At about five minutes, redistribute any slight excess. At 20°C, absorption generally takes 10–15 minutes; work in smaller areas as conditions become warmer.
- Do not allow unabsorbed product to dry on the surface. Remove it with a clean, dry cloth, repeat as directed and allow the 24-hour protection-development interval.
