Description
Overview
Tenax Ager enhances stone color with a lasting wet-look effect while adding water and oil repellency. This solvent-based treatment penetrates the stone rather than relying on a thick glossy film.
Features
- Deepens color on textured and honed finishes.
- Suitable for interior and exterior use; resistant to sunlight yellowing.
- Provides water/oil repellency and an anti-graffiti effect.
Specifications
- Container: Quart
- Treatment: Penetrating color enhancer and sealer
- Typical coverage: 20–30 m² per liter; varies with porosity
- Protection development: 24 hours
- Shelf life: 2 years at 18–25°C away from heat, moisture and sunlight
Downloads
- Tenax Ager Color Enhancer Sealer Technical Data Sheet
- Tenax Ager Color Enhancer Sealer Safety Data Sheet
Applications
For marble, travertine, granite, limestone, sandstone, quartzite and suitable agglomerates when a darker, wet-look appearance is desired. Especially useful on rough, sanded, brushed, flamed or honed surfaces; the result depends on the individual stone.
Selection and Use
- Test the final color on a hidden area first. Apply to clean, dry material and immediately remove unabsorbed excess to avoid sticky or glossy residue.
- Repeat after about 10–15 minutes as directed. Allow 24 hours before walking on a treated floor.
- Ager does not prevent acid etching on marble. Its enhancing effect is not a repair for etched or damaged stone.
