Description
Overview
Chim Italia Easy Black is a siloxane-based impregnating treatment for dark, absorbent stone. It deepens dark tones and helps conceal small scratches and surface imperfections while resisting water and humidity without forming a surface film.
Features
- Enhances dark stone while keeping the surface breathable.
- Penetrating treatment rather than a film-forming glossy coating.
- UV-resistant formulation.
- Manufacturer describes resistance to efflorescence and mold formation; existing deposits must be removed before application.
Specifications
- Container: 1 liter
- Type: Active-siloxane impregnating sealer and darkener
- Finish: Color-enhancing, non-film-forming
- Application: Brush or roller
- Excess removal: 15 minutes after the last coat
- Drying: At least 24 hours
- Dilution: Ready to use; do not dilute
- Origin: Italy
Downloads
Applications
Use on suitable dark granite, marble, resin marble, resin quartz, calcareous stone and cotto/terracotta. Easy Black is intended to deepen color; it is not the natural-effect choice for a surface whose existing color must remain unchanged.
Selection and Use
- Clean and dry the surface, removing dust, salts, stains, mold and encrustation so they are not sealed into the stone.
- Apply evenly to saturation. A brush is preferred for penetration into pores and detailed areas.
- Remove excess after 15 minutes from the last coat and allow at least 24 hours to dry.
- Small pieces may be treated by immersion as described in the data sheet. Pay particular attention to cavities and crevices on statues, vases and decorative work.
- Follow label and safety directions. Concealing a small imperfection changes its appearance; it is not a structural crack repair.