Description
Stain-Proof Waterbased Penetrating Sealer- Invisible Penetrating Sealer
Stain-Proof Waterbased Penetrating Sealer, formerly known as STAIN REPELLA™, is a penetrating, invisible and breathable water-based sealer which protects porous surfaces against stains to keep surfaces looking great.
Waterbased Penetrating Sealer is suitable to use indoors and outdoors for a wide variety of locations, including floors, walls, building facades, swimming pool surrounds, patios, garages, countertops, kitchens and entertaining areas.
Benefits
- Economical high performance sealer
- Superior stain repellence
- Treated surfaces stay looking good and are easier to maintain
- Invisible – so that the original look of the treated surface is maintained
- Easy single coat application
- Breathable – allows water vapor to escape, helping to prevent damaging moisture buildup inside the treated material
- Suitable for indoor and outdoor use
- Water-based and low VOC
- PFOA and PFOS-free
Waterbased Penetrating Sealer Technology
Waterbased Penetrating Sealer is a technological step forward, providing a superior level of protection for a competitive price:
1. Deeper penetration = deeper barrier of protection
Waterbased Penetrating Sealer's sealing molecules are engineered to be much smaller for better penetration, even into dense materials, such as granite.
2. Stronger bonding = longer lasting
Waterbased Penetrating Sealer's smaller molecules wedge themselves better into small nooks and crevices (stronger mechanical bonds). The hydrophylic atoms, which enable the molecules to adhere to the treated surface, are better arrayed for superior adhesion. These 2 factors also give Waterbased Penetrating Sealer a longer lifespan than common penetrating sealers.
3. Superior stain protection
Waterbased Penetrating Sealer's deeper protective barrier stops water traveling right up to the surface where it might cause visible damage. Waterbased Penetrating Sealer's liquid repelling atoms are also arrayed for maximum repellence, providing superior stain protection.
Waterbased Penetrating Sealer will Protect
- Basalt
- Brick
- Clay / Concrete Paver
- Granite- honed
- Granite- polished
- Limestone - honed
- Marble / Porcelain - polished
- Sandstone
- Saltillo
- Slate
- Terracotta
- Travertine - honed
- Travertine - polished
- Grout
Application Rate
Total application rate is approximately one 50 to 150 sq. feet per quart depending on absorption. Waterbased Penetrating Sealer must be allowed to cure for at least 3 weeks before undertaking testing.
Refer to the chart in the product images for the Table of Minimum Application Rate.
Available Sizes
- Quart
- Gallon
Warranty
*A 15-YEAR PERFORMANCE WARRANTY is offered when product applied by an Accredited Applicator following our written instructions and surface is maintained regularly using our written maintenance system, as outlined in our warranty document. Spills should still be cleaned up immediately to minimize absorption.
Visit DryTreat.com to find the nearest Accredited Applicator to you.
VOC Content
< 100 g/L (excluding water) for EPA purposes.
Specification Sheet
STAIN-PROOF Water-Based Sealer Brochure
Product Uses And Porosity Chart
