Description
Overview
SikaBond Ultimate Grab is a one-component polyurethane construction adhesive with high initial grab for compatible vertical and horizontal bonding. This gray 10.1-ounce cartridge provides a flexible cured bond while allowing a short adjustment window during placement.
Features
- High initial grab can reduce the need for temporary mechanical fixing in suitable lightweight assemblies.
- Moisture-cured, noncorrosive, low-odor formulation.
- Waterproof after full cure and the specified waiting period before immersion.
Specifications
- Color / cartridge: Gray / 10.1 fl oz
- Approximate coverage: 12.2 linear ft. at a 1/2 × 1/4 in. bead
- Repositioning: Approximately 30 minutes while contact between the bonded surfaces is maintained
- Application temperature: 40–100°F
- Tack-free / final cure: Approximately 2 hours / 5–7 days; temperature and humidity affect timing
Downloads
Applications
Bond suitable paver caps, masonry, faux or cultured stone, drywall and moldings to compatible construction surfaces. Listed substrates include cementitious materials, brick, ceramic, glass, metal and wood. Choose Ultimate Grab for its initial holding behavior, not as a replacement for a joint sealant.
Selection and Use
- Start with clean, dry, frost-free bonding faces. Heavy components still require bracing or temporary support; initial grab is not an unrestricted load rating.
- Do not use for expansion joints or on PVC, polyethylene, polypropylene, polystyrene, tar or asphalt.
- Keep the surfaces in contact if repositioning within the approximate 30-minute window.
- Allow at least one week before painting or immersion. Test water-, oil- or rubber-based coatings for compatibility and follow the data sheet’s exposure limitations.
