Description
Overview
Schluter LIPROTEC-ECX combines the LED power supply and dimmer in one wall control. It fits a standard electrical switch box and supplies compatible KERDI-BOARD-SNLT niches up to a 60-watt combined load. Three interchangeable faceplates provide finish choices without adding a separate driver and dimmer at the wall.
Features
- All-in-one power supply and dimming control.
- Smooth adjustment from 5% to full brightness.
- Can control multiple compatible niches within the load limit.
- UL listed in the USA and Canada.
What's Included
- LIPROTEC-ECX LED driver/dimmer
- Three interchangeable faceplates
Specifications
- Model: LIPROTEC-ECX
- Maximum connected LED load: 60 W total
- Dimming range: 5ā100%
- Mounting: Standard electrical switch box
- Faceplates: Three interchangeable plates included
- Manufacturer part: LTECX1W
Downloads
- Schluter LIPROTEC-ECX LED Driver and Dimmer Installation Guide
- Schluter LIPROTEC-ECX LED Driver and Dimmer Technical Data Sheet
Applications
Use for a KERDI-BOARD-SNLT installation where a combined wall-mounted driver and dimmer suits the electrical layout.
Plan Your Installation
- Add the connected niche-lighting loads and check them against the 60 W total output limit.
- Plan the standard electrical-switch-box location and the cable route to each niche.
- Choose among the three supplied faceplates to coordinate the driver/dimmer with the finished room.
Common Planning Questions
Is a separate dimmer needed for the ECX function?
ECX combines the LED driver and dimmer in one control.
Does the 60 W rating apply to each niche?
No. It is the total connected LED load supported by the driver.
