Description
Overview
LIPROTEC-CW connects the white LED lighting in a KERDI-BOARD-SNLT niche to the matching LIPROTEC power system. The cable includes a waterproof snap-in gland for the niche connection and connectors for the LED strip. Select its length from the full route between the niche and the accessible power/control location.
Features
- Pre-installed gland provides the specified connection at the niche.
- Rated for in-wall installation without conduit.
- Three cable lengths accommodate different routing distances.
What's Included
- LIPROTEC-CW cable in the selected 4, 8 or 15 m length
- Pre-installed waterproof snap-in gland and LED-strip connectors
Specifications
- Cable type: Class 2 low voltage, CL2
- Conductors: 2-conductor, 20 AWG
- Rating: CSA FT4, 80Ā°C
- Lengths: 4 m, 8 m, or 15 m
- Approximate lengths: 13 ft. 1-1/2 in., 26 ft. 3 in., or 49 ft. 2-1/2 in.
- Listing: UL listed in the USA and Canada
- Available size: 4M / 8M / 15M
Downloads
- Schluter LIPROTEC-CW Cable for LIPROTEC White LED System Installation Instructions
- Schluter LIPROTEC-CW Cable for LIPROTEC White LED System Technical Data Sheet
Applications
Use as the connecting cable in the KERDI-BOARD-SNLT/LIPROTEC white-LED system.
Plan Your Installation
- Measure the complete cable route from the illuminated niche to its accessible power/control location, including the connection approach.
- Choose the 4, 8 or 15-meter length from that route, not just the distance across the room.
- Coordinate the waterproof snap-in gland at the niche before completing the wall finish.
Common Planning Questions
Is this the LED strip or the driver?
Neither. It is the connection cable for the LIPROTEC white-LED niche system.
Can I choose any low-voltage cable instead?
This product provides the specified conductors, connectors and niche gland. Use the system connection detail rather than assuming another cable is an equivalent assembly.
