Description
Overview
Rapid Set Cement is a rapid-hardening hydraulic cement for designing concrete, mortar and grout mixtures. This 88-pound bag supplies the cement binder—not a preblended concrete mix—so aggregate selection, water content and trial batching remain part of the job.
Features
- Can produce mixtures reaching structural strength in as little as 1 hour.
- Engineered for low shrinkage and resistance to chemical attack.
- Suitable for conventional ready-mix and volumetric mixing equipment.
- Manufacturer reports lower production CO₂ emissions than conventional Portland cement.
Specifications
- Package: 88 lb (approximately 40 kg)
- Product type: Rapid-hardening hydraulic cement binder
- Specific gravity: 2.98, as listed for volume calculations
- Use: Interior and exterior concrete, mortar and grout
- Shelf life: 12 months when properly stored
Applications
Use in properly designed mixtures for pavement, bridge, runway, tunnel, sidewalk, concrete-floor and precast work, as well as commercial, industrial and infrastructure repairs where early strength is important.
Selection and Use
- For a small trial batch, the manufacturer’s starting example uses one 88 lb bag, 176 lb sand, 176 lb of 1/4–3/4-inch stone and about 4 gallons of potable water. These are mix ingredients to supply separately, not contents of the bag.
- Customize and trial the mix for the application before full placement. The example is not an engineered design for every structure or exposure.
- Actual strength and return-to-service depend on the complete mix and conditions; do not transfer Concrete Mix or Cement All thickness and water figures to this binder.
- Store dry, protected from moisture and direct sunlight, in the original undamaged package. Request project-specific EPD or LEED information from the manufacturer if required.