Description
Overview
Miracle Sealants Mira Hone is a non-wax powder compound for honing and deep cleaning marble, travertine, limestone and terrazzo. It addresses light scratches, etch marks and traffic patterns while preparing the surface for further polishing when a higher finish is desired.
Features
- Non-acid, non-coating honing process.
- Can be used on floors that have lippage; it is not a claim that the powder levels uneven tile.
- No coating to yellow or strip away.
Specifications
- Container: 1 lb.
- Coverage: Approximately 80–115 sq. ft. per pound
- Working area: About 25–35 sq. ft. at a time
- Starting quantity: About 5 oz. per 25 sq. ft.
- Buffing guide: About 10 minutes per working area, adjusted for results
Downloads
Applications
Use for restoration or maintenance of compatible stone floors, restroom and shower surfaces, kitchens and counters. The goal is a honed surface or preparation for a separate final polish, not a wax-like shine from an added coating.
Selection and Use
- Remove existing coatings and waxes. Wet a small area, distribute the powder and work it into a slurry with the specified stone floor machine and natural-hair brush or red nylon pad.
- Keep the slurry wet. Move it aside with a squeegee to inspect the finish and work longer only as needed.
- Wet-vacuum the excess, damp-mop and allow to dry. For a higher polish, follow with a suitable manufacturer-recommended polishing compound such as Marble Conditioner or Mira Dust. Test the process before treating the full floor.
