Description
Overview
Miracle Sealants Epoxy Grout Film Remover loosens cured epoxy grout film left on tile, stone and concrete. It is a specialized residue remover, not an acid cleaner for cement haze and not a product to leave soaking in sound grout joints.
Features
- Low-odor, non-acid formula without methylene chloride.
- Removes compatible epoxy residue and certain acrylic, shellac, varnish, lacquer and gym finishes.
- Loosened residue is cleaned up with water as directed.
Specifications
- Dilution: Use directly from the container; do not thin
- Spot-cleaning dwell: Typically 20–30 minutes, checking for softening
- Coverage guide: Approximately 50–150 sq. ft. per gallon under the manufacturer’s detailed directions
Size Options
- Quart
- Gallon
Downloads
- Miracle Sealants Epoxy Grout Film Remover Data Sheet
- Miracle Sealants Epoxy Grout Film Remover Safety Data Sheet
Applications
Use on compatible ceramic, porcelain, quarry tile, natural stone and concrete affected by epoxy film. Identify the residue and test the surface before proceeding, especially when the installation has a finish or sealer that must remain.
Selection and Use
- Apply to the tile face and avoid the grout joint. The remover can soften or discolor joints, which may then require regrouting.
- Allow the film to soften and remove it with a stiff non-steel brush or suitable nylon pad. Older or heavier film may take longer or need repeat treatment.
- Collect residue, clean with the specified follow-up cleaner, rinse and dry. Work in manageable areas and follow the label for ventilation, gloves and disposal; used material is not ordinary waste.
