Miracle Sealants 511 Impregnator Sealer
This is a VOC product. To order a gallon quantity or more, you must live outside of a VOC restricted state See Below for more information or Click Here
Confused by Sealers? Take a look here: Sealer Buying Guide
Uses:
- Sanded Grout
- Porcelain Tile
- Concrete
- Quarry Tile
- Quartz
- Polished Granite
- Brick
- Travertine
- Ceramic Tile
- Polished Marble
- Stucco
- Agglomerate
- Glazed Tile
- Terrazzo
- Slate
- Interior & Exterior Use
- Weather Resistant
- Less Expensive
- OK for Food Areas
- Superior Coverage
- Easy to Use
- UV Transparent
Before Grouting: Apply Miracle Sealants 511 Impregnator Sealer to all surfaces prior to grouting. This step will allow quick and easy cleanup after grouting. Grout can stain many surfaces if this procedure is not used prior to the grouting process. Apply using a Mira Brush or a clean towel. Apply enough to wet the surface. (See coverage charts) Be careful not to saturate the open grout joints. Allow to stand for approximately 3 - 5 minutes for maximum penetration. All excess must be removed at this time by buffing surface with a clean dry towel. This is very important on polished, glazed and porcelain surfaces. Allow Miracle Sealants 511 Impregnator Seal to cure for 12 - 24 hours before continuing with the grouting procedure.
After Grouting: Once grouted, make sure that all grout residue is removed from the surface with a clean sponge and water. Allow grout to cure per manufacturers specification. If grout clean up is not performed effectively, an additional cleaning may be necessary to remove remaining grout residue or haze. For this procedure use Phosphoric Acid Cleaner , (GCFR) Grout & Concrete Film Remover (Hydrochloric Acid), Sulfamic Acid Crystals or Epoxy Grout Film Remover following the instructions carefully. Once the area has completely dried, proceed with the sealing of the grout for water and stain resistance. Apply Miracle Sealants 511 Impregnator Sealer to all grout with a paint brush.
Any excess sealer that gets on the surface should be wiped off with a clean towel before it dries. On larger jobs grout can be sealed by retreating the entire area including the tile or stone surface a second time. Be careful not to allow the sealer to puddle or dry on presealed surfaces.
It covers approximately 1,000 - 4,000 square feet per gallon (90 - 364 square meters per 3.785 liters).
VOC Restricted States:
CA ME OH
AZ MD PA
CT MA RI
DE MI VT
DC NH VA
IL NJ WI
IN NY
- 30.00224:
- 511GAL4
Reviews
-
Impregnator
Easy looks wonderful!
-
Best sealer EVER!
I've used this for years. Now sealing 3000 square feet of exposed aggregate. Huge job but after pressure washing and applying 511 it looks amazing. Hadn't been cleaned since 1987 so worth the effort.