Description
Overview
Miracle Sealants 511 Anti-Slip Formula is a penetrating sealer designed to increase the static coefficient of friction of compatible flooring while providing moisture and stain resistance. It preserves a natural appearance rather than adding a grit coating.
Features
- For compatible interior and exterior stone, tile and concrete.
- Allows moisture vapor to escape.
- Natural-look protection; test first because slight shading can occur.
Specifications
- Container: Quart
- Coverage: Approximately 100–750 sq. ft. per quart
- Second application: Required; allow at least 2–4 hours between applications
- Full cure: Allow 24–72 hours
Downloads
- Miracle 511 Anti-Slip Formula Sealer Data Sheet
- Miracle 511 Anti-Slip Formula Sealer Safety Data Sheet
Applications
Use on compatible granite, marble, limestone, travertine, slate, terrazzo, ceramic, porcelain, quarry or glazed tile, grout and concrete. Typical applications include kitchens, bathrooms, showers, patios and commercial floors. The product is not a guarantee that a floor cannot become slippery.
Selection and Use
- Clean and prepare the surface, then test the treatment on the actual finish before committing to the full area. For maximum stain protection, the manufacturer recommends an appropriate Miracle penetrating sealer before Anti-Slip.
- Apply undiluted to dampen the surface. Let it penetrate for 3–5 minutes, then remove all excess before drying. Apply the second treatment after at least 2–4 hours.
- Reapplication depends on traffic and wear; monitor the floor and follow the current label. Keep the solvent product ventilated and away from heat and open flame.
