Description
Overview
The IMER Combi 250 VA is a 10-inch wet tile saw with an overhead travel beam, plunge-cutting head and 45-degree tilt. It provides 28 inches of regular cutting length or up to 31 inches with a plunge cut, making it a compact alternative to the longer Combi 250/1000 and 250/1500 machines.
Features
- Cast-aluminum construction and a head pivot with sealed bushing. Hand-built in Italy.
- Laser guide and adjustable protractor help align cuts.
- Tilting rail provides 45-degree cutting; plunge action assists shaped cuts.
- Side table, folding stand, water valve and removable baffled pan are supplied.
What's Included
- 10-inch continuous-rim porcelain blade.
- Side table, folding stand and 180-degree protractor.
- Laser guide, water pump, adjustable valve and removable poly pan with baffles.
Specifications
- Model: 1188164
- Blade / shaft: 10 in. / 5/8 in.
- Cut length: 28 in.; 31 in. with plunge
- Maximum depth: 3-3/4 in.
- Motor: 1.75 HP, 110V, 15A, single-phase
- Blade speed: 2,800 rpm
- Water pan / pump: 10 gal. / 3 gpm
- Machine / boxed weight: 72 lb / 85 lb
Downloads
Applications
Use the Combi 250 VA for porcelain, ceramic tile and compatible stone cutting within its 10-inch-blade capacity. The plunge head helps form L cuts, and the beam’s tilt is useful for 45-degree edges.
Selection and Use
- Check the required cut against 28 inches of regular travel rather than assuming the 31-inch plunge figure applies to every cut.
- Use a blade suited to the material and support overhanging pieces on the side table.
- The optional tile clamp 1188157 is separate from the included protractor and side table.
