Description
Overview
The IMER Combicut 250/1500 VA is a long-bed overhead-rail wet saw for large-format tile, porcelain and stone. Its 57-inch cutting length extends to 60 inches with a plunge cut, while the tilting beam provides 45-degree cuts without moving the work onto a separate miter fixture.
Features
- Cast-aluminum cutting head pivots on a sealed bushing for controlled plunge and L-shaped cuts.
- Overhead travel beam and long pull handle guide the blade across long pieces.
- Laser guide and adjustable protractor help position straight and angled cuts.
- Side table supports overhanging tile; the integrated wheeled stand folds for transport.
- Removable poly water pan, baffle and adjustable water valve simplify water management and cleanup.
What's Included
- Combicut 250/1500 VA saw with 10-inch continuous-rim porcelain blade.
- Integrated folding stand and wheel kit; side table.
- 180-degree protractor and laser guide.
- Water pump, precision water valve and removable poly water pan with baffle.
Specifications
- Model: 1188180
- Blade / shaft: 10 in. / 5/8 in.
- Cut length: 57 in.; up to 60 in. with plunge
- Maximum depth: 3-3/4 in.
- Motor: 1.75 HP, 110V, 60Hz, single-phase, 15A
- Blade speed: 2,800 rpm
- Water pan / pump: 13 gal. / 3 gpm
- Machine weight: 125 lb; boxed weight 150 lb
- Operating size (L × W × H): 76 × 25 × 24 in.
- Boxed size (L × W × H): 77 × 27 × 26 in.
- Sound pressure: Less than 78 dB(A)
Downloads
Applications
Choose the 250/1500 VA when the job involves long tile or stone cuts that exceed a compact tile saw’s travel. The plunge head is useful for L cuts around door jambs, while the tilting rail handles 45-degree edges.
Selection and Use
- Check the required cut length against the 57-inch straight-cut capacity; the 60-inch figure includes the plunge-cut allowance.
- Use the included side table to support large-format pieces and select a blade suited to the material being cut.
- Plan for the saw’s 110V, 15A supply and water system. Refer to the linked manual for setup, blade selection and operating procedures.
- The optional tile clamp, IMER 1188157, is an accessory rather than part of the standard package.
