Description
Overview
The IMER Combicut 250/1000 VA is a 10-inch overhead-rail wet saw for longer tile and stone cuts. Its 37-inch regular cutting length extends to 40 inches with the plunge head, while the integrated wheeled stand folds for transport.
Features
- Cast-aluminum head pivots for plunge and L-shaped cuts.
- Beam tilts for 45-degree cuts without changing to a separate miter fixture.
- Laser guide and 180-degree protractor assist cut positioning.
- Side table supports large-format tile; removable baffled pan and precision valve manage the water system.
What's Included
- 10-inch continuous-rim porcelain blade.
- Integrated folding stand with wheel kit and side table.
- 180-degree protractor and laser guide.
- Water pump, precision water valve and removable baffled water pan.
Specifications
- Model: 1188174
- Blade / shaft: 10 in. / 5/8 in.
- Cut length: 37 in.; 40 in. with plunge
- Maximum depth: 3-3/4 in.
- Motor: 1.75 HP, 110V, 15A, single-phase
- Blade speed: 2,800 rpm
- Water pan / pump: 12 gal. / 3 gpm
- Machine / boxed weight: 82 lb / 98 lb
- Sound pressure: Less than 78 dB(A)
- Operating size (L × W × H): 55 × 25 × 24 in.
Downloads
Applications
The 250/1000 VA suits tile and stone work needing more travel than a compact saw without moving to the longer 250/1500 VA bed. Use the plunge action for shaped cuts such as L cuts at door jambs, and the tilted rail for 45-degree edges.
Selection and Use
- Allow for 37 inches of regular cutting travel; 40 inches is the plunge-assisted figure.
- Support long pieces with the side table and select the blade for the actual material.
- The 1188157 tile clamp is optional; refer to the linked manual for water-system setup and saw operation.
