Description
Overview
Glaze ’N Seal Phosphoric Acid Cleaner is a concentrated cleaner for cement haze, grout smears, efflorescence, hard-water stains, lime and rust deposits on acid-resistant surfaces. Cleaning agents help lift dirt, soil and grease along with mineral residue.
Features
- Chemically dissolves cement-based residue and haze.
- Concentrated formula can be diluted for the cleaning task.
- Works in hard or soft water.
Specifications
- Type: Phosphoric-acid-based cleaner concentrate
- Dilution: Up to 10 parts water, depending on the task; follow the label
- Typical dwell: 2–5 minutes per linked guide; do not let it dry on the surface
Size Options
- Quart
- Gallon
Downloads
Applications
Use on glazed ceramic tile, brick, masonry, unpolished natural stone and concrete only when the surface will not be harmed by acid. It may also be used for mild concrete etching. It is not a universal stone cleaner.
Selection and Use
- Do not use on acid-sensitive surfaces such as marble, terrazzo, colored cement, metallic-glazed tile or aluminum. Acids can etch, lighten or change cementitious materials and stone, including limestone.
- Test a small area and wait 24 hours to evaluate the result. Protect adjacent finishes and use caution near carpets and colored grout.
- Pre-wet the surface. When diluting, always add the acid cleaner to water. Wear the protection required by the label and safety data sheet.
- Agitate with a stiff nylon or natural-bristle brush or white pad, remove the dirty solution and rinse thoroughly. Do not mix with other cleaners.
- Before a subsequent sealer or coating, neutralize as instructed and allow the surface to dry completely.
