Gemini Revolution XT - Double-Sided Standard Blade 1054
This is the Revolution XT 10" Glass Blade and this is just what you need. This blade is designed for those of you who want to cut any type of glass chip free. It has a very fine diamond grit so there is virtually no clean up required after the cut.
The "Glass Blade", is for straight cuts in glass leaving the smoothest cut of any saw in the industry. (All blades cut all materials well but this is the best one for glass). The Revolution blades are very similar to the solid 10" diameter blades you will find on most high quality wet saws. The difference is that these blades have no center, giving you the ability to not only cut straight lines but also make tight radius cuts.
These blades run at a much slower R.P.M. than any tile saw but with far more torque, so they give the user a much higher quality cut with far less chipping and superior blade life.
The single sided Glass Blade has a 10" diameter. It is a sintered diamond blade designed for forward cutting. With this blade you also get a 1" cube dressing stone just in case you need to true up the blade, but you'll probably never use it unless you get into real hard materials like technical ceramics.
Gemini Part # 1055