Description
Overview
Cyclone CNC Half Gas Wet Core Bits use T-segments and slot openings for coring granite and engineered stone on CNC equipment. The offered 1-3/8-inch and 1-1/2-inch versions have a 1/2-gas male connection.
Features
- T-segment cutting design.
- Slot openings intended to reduce blow-out and extend bit life.
Specifications
- Fitting: 1/2-gas male
- Usable length: 3 inches
- Maximum speed: 2,300 RPM
- Use: Wet only
Size Options
- 1-3/8"
- 1-1/2"
CDBYH138
- Size: 1-3/8"
- Fitting: 1/2 gas male
- Usable Length: 3"
- Max RPM: 2,300
CDBYH112
- Size: 1-1/2"
- Fitting: 1/2 gas male
- Usable Length: 3"
- Max RPM: 2,300
Applications
Use these bits for wet coring on a CNC machine with the matching gas-thread connection. The listed starting feed recommendation is 2 inches/minute through a 30 mm slab.
Selection and Use
- Select the 1-3/8-inch CDBYH138 or 1-1/2-inch CDBYH112 diameter for the required hole.
- These selections are not the reverse-thread variants shown in the wider product family.
- Keep the 30 mm slab condition with the 2 IPM feed guidance; it is not a universal setting for every thickness.
