Description
Overview
The Alpha PSC-600 is a wet pneumatic stone cutter with a center-water-feed system that supplies both sides of the diamond blade. Its compact body, composite end case and cushioned gear-head cover are designed for maneuverability and comfort during fabrication work.
Features
- 8,500 RPM no-load speed.
- Spring-return throttle helps avoid an accidental start.
- 15-foot all-weather hoses remain flexible from -40°F to +140°F (-40°C to +60°C).
- Enhanced spindle and supplied wrenches simplify tool removal.
- One-year tool warranty.
What's Included
- 1 - Air Hose 15 ft. (4.5m)
- 1 - Water Hose 15 ft. (4.5m)
- 1 - Side Handle (reversible)
- 1 - Rust Inhibitor Oil 6.7oz (200ml)
- 1 - Screw (w/ O-Ring Seal for Oil Port)
- 1 - Spring Washer
- 1 - 6" Safety Guard
- 1 - Double End Wrench (19mm/22mm)
- 1 - Phillips Screwdriver
- 1 - Water Quick Coupler w/ Shut Off Valve
- 1 - O-Ring (O-Ring for Water Valve Repair)
- 1 - Single Open Wrench
- 1 - Hex Wrench (6mm)
- 1 - Inner Flange for Cutting
- 1 - Outer Flange
- 1 - L-Bracket
- 1 - Inner Flange for Grinding
Specifications
- Model: PSC-600
- Air pressure: 85 PSI / 6 bar
- Air consumption: 15 CFM / 425 L/min
- Weight: 2.90 lb / 1.3 kg
- Air inlet: 1/4-inch BSPP
- Water inlet: 1/8-inch BSPP
- Arbor: 7/8 inch / 22.23 mm
Downloads
Applications
Use the PSC-600 for wet stone cutting in a fabrication shop equipped with a suitable compressed-air and water supply. The tool can also serve as a grinder with the appropriate configuration and flange.
Selection and Use
- Check the 15 CFM air requirement at the specified pressure before choosing the tool; a pneumatic cutter depends on the available air supply.
- Use the cutting or grinding flange appropriate to the operation and consult the linked manual for the full setup.
- The water quick coupler includes a shutoff valve. Water feed helps control dust and cool the blade; it does not replace the manual’s protective measures.
