Description
Overview
Alpha PSC-150 is a 6-inch pneumatic stone cutter with a 2 HP motor and speed-control governor that adjusts air consumption to the cutting load. It is designed for industrial fabrication, including sink openings, rodding grooves and miter cuts in 1-1/4-inch (3 cm) material.
Features
- Wet or dry cutting with the appropriate setup.
- 2,000-hour duty-cycle specification.
- Kink-resistant 15-foot air and water hoses.
- Eclipse II 6-inch blade and rust-inhibitor oil supplied.
What's Included
- 3 - Flanges
- 2 - Bolts (M6x30 Left / M6x20 Left)
- 1 - Side Handle
- 1 - Combination Wrench (9mm)
- 1 - Hex Wrench (5mm)
- 1 - Open End Spanner Wrench (22mm)
- 1 - Air Hose (15ft / 4.5m)
- 1 - Water Hose (15ft / 4.5m)
- 1 - Bottle of Rust Inhibitor Oil (8oz / 237ml)
- 1 - Alpha Eclipse II 6" Blade
Specifications
PSC-150
- Air Pressure: 90 PSI (6.2 Bar)
- Air Consumption Min.: 929 L/min; 32 CFM / 1 HP
- Air Consumption Max.: 48 CFM / 2HP
- No Load Speed: 8,500 RPM
- Air Inlet: 3/8" NPSM
- Water Inlet: 1/4" BSPP
- Arbor: 7/8" (22.23mm)
- Max HP: 2.0 HP
- Cutting Disc Diameter: 6" (150mm)
Applications
Use the PSC-150 for granite, engineered-stone or suitable marble cutting with the correct blade. Its torque supports one-pass cutting of 3 cm stone; an optional carriage and Alpha Guide Rail System support guided miter work for laminations.
Selection and Use
- Provide an industrial air supply capable of the listed pressure and airflow. The maximum specification is 48 CFM at 2 HP; size the system for the actual load.
- The supplied Eclipse II is recommended for granite/engineered stone. Alpha identifies Katana 6-inch for porcelain, Hot-Rod 4-inch for rodding channels, and Libero 5-inch for marble.
- Follow the tool’s lubrication and muffler-care instructions. Pneumatic operation is not maintenance-free.
- For dry cutting, Alpha calls for sufficient dust collection; wet cutting is recommended to reduce dust.
