Description
Overview
Alpha ESC-125 is a 5-inch wet/dry stone cutter for portable slab work, including sink openings, countertop trimming and reinforcement grooves. The water manifold directs water toward the cutting edge and clears slurry ahead of the tool; a separate dust cover supports dry work with a connected HEPA vacuum.
Features
- Side-mounted clamping lever adjusts cutting depth for step cuts and smaller groove-cutting blades.
- Flexible, kink-resistant 15-foot water hose with quick-connect garden-hose adapter.
- EasyOn-EasyOff sleeve bundles the hose and cord to reduce drag.
- Base plate supports guides; supplied felt strips help protect the work surface.
- Built-in GFCI and one-year warranty, subject to the manualās terms.
What's Included
- 1 Dust Cover
- 3 Knob Bolts
- 1 TT Ruler Guide (Reversible)
- 1 Water Hose Assembly (15ft / 4.5m)
- 1 Quick Connect Adapter
- 1 Side Handle
- 1 Screw (M6x30-Left)
- 1 Flange 3
- 1 Carbon Brush Set
- 1 T-Handle Wrench
- 1 Open End Wrench (22mm)
- 1 Self-Stick Felt Strip Set
- 1 Ground Fault Circuit Interrupter
- 1 Easy On-Easy Off Sleeve
- 3 SS Flat Head Screw (M4x10)
- 1 Water Valve Assembly
Specifications
- Model: ESC-125
- Rating: 110V
- Amperage: 11.2A
- Power: 1,200W
- No Load Speed (min-1): 12,000 RPM
- Weight: 8.9 lbs.
- Arbor: 7/8 inch (22.23 mm)
- Cutting Disc Diameter: 5" (125mm)
- Max. Cutting Depth: 1-5/8 inches (41 mm)
- Cord: 15 ft. (4.5m) Single-Phase
Downloads
Applications
Use the ESC-125 for granite, quartz surfaces, marble, limestone, concrete and sintered slabs with the appropriate blade. The existing application information includes cutting 3 cm material and using curve-cutting blades for sink openings.
Selection and Use
- For dry countertop trimming, connect the dust cover to an appropriate HEPA vacuum. Do not treat the cover alone as a complete dust-control system.
- For wet cuts, set up the aluminum water manifold and hose as described in the manual.
- The tool is listed for a standard 110 V, 15 A circuit; its rated current is 11.2 A.
- Check blade diameter, arbor and cutting-depth requirements before selecting tooling.
