Tenax Ager Color Enhancer Sealer - Quart
WET LOOK NATURAL STONE SEALER & ENHANCER.
Tenax Ager is a stone enhancer and sealer that revitalize and enhances the color of natural stone surfaces. Use the 1 Quart ager on your natural stone surfaces to give the stone a deep, rich appearance and protect the pores from absorbing potentially discoloring liquids that could stain the surface
Tenax Ager is a solvent-based product That performs two main functions on natural stone surfaces. First, it protects all sorts of natural stone materials from absorbing liquids that could mar the appearance of the stone. Second, Ager enhances the natural color and grain of the material to which it is applied. Additionally, Tenax Ager helps protect the natural stone against graffiti.
How to Apply
Using a paintbrush, cloth, fleece, or sponge applicator, apply Tenax Ager undiluted to a completely clean and dry natural stone surface. Allow the material to naturally absorb the Ager evenly. Within a few seconds of application, wipe off any Ager that was not absorbed into the natural stone material using a clean cloth or sponge.
Avoid applying Ager in direct sunlight. Wait 24 hours after treatment for the finished surface. In the case of treating natural stone surfaces that receive foot traffic, do not walk on the treated surface for 4-6 hours after treatment.
Benefits of Ager
Adding Ager to natural stone surfaces produces benefits and adds beauty to the stone. The following list enumerates some of the benefits of applying Ager to natural surfaces:
- UV Resistant
- Non Yellowing
- Stain Resistant
- Enhances Color Tone
- Helps Protects Against Graffiti
Material Compatibility
Tenax Ager is a color and grain enhancer and sealer designed for adding beauty to all sorts of natural stone surfaces including the following materials:
- Marble
- Granite
- Limestone
- Sandstone
- Quartzite
- Travertine
- Agglomerate
- Rosso Verona
WARNING: Tenax Ager does not provide anti-etch protection on marble surfaces. Use of acidic substances such as wine, tomatoes, citrus, coffee, etc. will etch the surface by creating a chemical reaction with eh calcium carbonate present in marbles. For etching problems use Tenax TeEtch.
Technical Information
- Density at 25°C gr/cm2: 0.95
- Appearance: Opalescent Liquid
- Color: Colorless
Size
- 1 Quart
Approximate Coverage per 1 Quart
The consumption greatly depends on the porosity of the material being treated. Each type of natural stone varies in porosity. Additionally, stones vary in porosity even if they are the same type. The following list gives some general coverage guidelines for some stone.
Material | Approximate Coverage per Quart |
---|---|
Honed Stone & Marble | 203 - 356 sq.ft. |
Polished Marble & Granite | 305 - 509 sq.ft. |
Tenax Ager Color Enhancer Sealer Technical Data Sheet
Tenax Ager Color Enhancer Sealer Safety Data Sheet
- 30.19600:
- 1MPA00BG50
Reviews
-
Tenax Ager Enhancer
Provides darker enhancement than most like products. Works well on exterior counters. Holds up well.