Rubi Slab Cutter G3 System

Overview

The RUBI SLAB CUTTER G3 16900 is a guide-based manual cutting system for large-format porcelain sheets. Red aluminum rails join with quick couplings, and the scoring carriage runs on three horizontal bearings before the separate SLAB nipper breaks the scored material.

Features

• Lightweight G3 guides with a design that retains the carriage on the track.
• Quick-coupling guide connections.
• Integrated suction cups with non-marking rubber bases for light-colored material.
• 22 mm EXTREME scoring wheel for smooth, rough and structured finishes.
• Soft-grip carriage handle and dual-function SLAB nipper.

What's Included

• Three red aluminum G3 guides with suction attachments.
• Aluminum scoring carriage with 22 mm EXTREME wheel.
• Dual-function SLAB nipper.
• Padded reinforced textile transport bag with compartments.

Specifications

• Reference: 16900
• Supplied-guide cutting capacity: Up to 126 in. (approximately 3.2 m)
• Scoring wheel: 7/8 in. (22 mm) EXTREME
• Included nipper capacity: Up to 10 mm (0.39 in.) material thickness
• Guide count: Three; additional compatible sections can extend the system

Applications

Use for manual scoring and separation of large-format porcelain sheets. The supplied rails establish the cutting path, while the nipper’s 10 mm limit governs the included breaking tool.

Selection and Use

• Connect and secure the G3 guides for the required cut before scoring.
• Check the slab thickness against the supplied nipper’s capacity.
• Additional guide sections extend length, not the nipper’s material-thickness capacity.
• Keep the suction bases clean and confirm their attachment to the actual surface.