Description
Overview
The Omega Diamond Blue Ripper G2 with Makita GA7021 motor is a 32 lb. rail saw for portable stone fabrication. It accepts the specified 6"–10" blade range and provides approximately 6 cm straight-cut capacity, with 45° miter work available through a compatible Miter Base attachment.
Features
- Makita GA7021-powered configuration.
- Portable rail-guided machine for shop or on-site work.
- 6"–10" blade range for the specified setup.
- Guide rails are required and sold separately.
What's Included
- Blue Ripper G2 saw with Makita GA7021 motor. Rails are not included.
Specifications
- Model: 196-243
- Motor: Makita GA7021
- Power: 120V cord with GFCI
- Weight: 32 lb.
- Blade size range: 6"–10"
- Straight-cut depth: Approximately 2.3" / 6 cm
- Manufacturer speed example: 6 ft./minute on granite; actual rate depends on material and setup
- Miter capability: 45° with a compatible separate Miter Base
Applications
Use for straight slab cuts in compatible stone, including granite and marble, with the appropriate blade and Blue Ripper guide rail. Add the correct Miter Base when the project requires angled edge work; do not assume the full straight-cut depth applies to miters.
Selection and Use
- Order suitable Blue Ripper rails separately and provide adequate entry and exit travel for the machine.
- Match the blade to the material and confirm its suitability for the saw. Blade diameter, wear and attachment affect available cutting depth.
- Use the listed 120V GFCI power arrangement and the manufacturer’s water-feed and operating instructions.
