Laticrete NXT Level Gray - 50 lb

Overview

NXT Level is a cement-based floor underlayment for leveling interior substrates before finish flooring. Its pourable or pumpable formula allows a single lift from 1/8 to 3 in., useful where the floor needs more depth correction than a skim patch.

Features

• Creates a smooth, hard surface for appropriate finish floor goods.
• Can taper to zero at edges as directed.
• Suitable over prepared gypsum-based substrates.
• Inorganic formulation does not contribute to mold or mildew growth.
• Direct replacement for DRYTEK LEVELEX.

Specifications

• Package: 50 lb, gray
• Single-lift depth: 1/8–3 in. (3–76 mm)
• Approximate coverage per bag: 1/8 in.: 44 sq. ft.; 1/4 in.: 22; 1/2 in.: 11; 1 in.: 5.5; 2 in.: 2.7; 3 in.: 1.9 sq. ft.
• Concrete RH allowance: 100% or less under ASTM F2170, subject to the complete floor-system requirements

Downloads

• Laticrete NXT Level Data Sheet
• Laticrete NXT Level Safety Data Sheet
• Substrate Preparation and Primer Guide

Applications

Use over prepared interior concrete, mortar beds, cement backer board, cement terrazzo, existing ceramic tile/stone, exterior-glue plywood, gypsum underlayments or vinyl tile according to the preparation and primer guide.

Plan Your Installation

• Survey high and low areas and calculate material from the required depth—not only the room area.
• Use the linked substrate and primer guide for the actual surface and follow the relevant underlayment detail.
• Check the finish-flooring and adhesive moisture requirements separately; the underlayment’s RH allowance does not override them.

Common Planning Questions

Can one bag cover the same area at every thickness?

No. For example, the listed yield is about 44 sq. ft. at 1/8 in. but only 5.5 sq. ft. at 1 in.