Description
Overview
This HYDRO BAN Shower Pan listing supplies a pre-sloped EPS pan and sheet membrane for the pan assembly. It is not a drain-only item or a complete shower kit: the curb, bonding-flange drain and thin-set are separate. Choose the pan footprint and available drain location to match the shower layout.
Features
- Pre-sloped, lightweight EPS construction replaces forming a traditional mud bed within the pan footprint.
- Can be modified on site following LATICRETEās installation method.
- Supplied sheet membrane exceeds ANSI A118.10 and is IAPMO approved.
- Walls can be finished with HYDRO BAN Board or appropriate liquid/sheet waterproofing over cement backer board.
What's Included
- HYDRO BAN EPS shower pan in the selected valid size/drain configuration.
- HYDRO BAN Sheet Membrane to cover the pan and curb, plus the product data sheet.
- Curb, bonding-flange drain, thin-set and wall waterproofing materials are separate.
Specifications
- Center-drain models: 38 x 38 in.: 9243-3838-CDP; 48 x 48 in.: 9243-4848-CDP; 72 x 72 in.: 9243-7272-CDP; 48 x 72 in.: 9243-4872-CDP; 32 x 60 in.: 9243-3260-CDP
- Off-center model: 32 x 60 in. only: 9243-3260-OCDP
- Construction: High-density EPS pan with separate HYDRO BAN Sheet Membrane
- Sheet membrane vapor permeance: 0.06 perms, ASTM E96/E96M Procedure E; approved steam assemblies require the complete specified details
- Size: 32" X 60"; 38" X 38"; 48" X 48"; 48" X 72"; 72" X 72"
- Orientation: Center; Off-Center
Downloads
Applications
Use in suitable interior residential, commercial or industrial shower installations, including stalled gang showers and pet showers. The pan is a component of the waterproofed tile assembly, not an exposed finished floor.
Plan Your Installation
- Measure the opening and locate the waste line before ordering. Off-center is available only with the listed 32 x 60 in. pan.
- Select the compatible drain separately. The linked pan instructions exclude the HYDRO BAN Tile-In Bonding Flange Drain and specify the brushed, polished or oil-rubbed-bronze versions.
- Install on a properly prepared, structurally suitable substrate with the specified fortified thin-set. Follow the pan details for wood construction rather than installing directly over a single wood layer.
- Complete membrane seams and wall transitions, then wait at least 24 hours before flood testing so the thin-set can cure. Protect the membrane until it is covered with tile or another permitted finish.
- Do not use over structural or vertically moving cracks, or in submerged applications. System warranty eligibility depends on the complete installation and warranty terms.
Common Planning Questions
Does this include a curb or drain?
No. The pan and sheet membrane are supplied; select the curb and compatible bonding-flange drain separately.
