Description
Overview
The iQTS244 is a 10-inch dry-cut tile saw supplied here with an X-Stand and combination blade. Its integrated vacuum collects cutting debris while the Q-Drive system cuts ceramic, porcelain, marble and suitable stone without a water supply.
Features
- Integrated cyclone collection described as capturing 99.5% of dust.
- 92 CFM vacuum and iQ Dura Bond cartridge filter.
- Dry cutting avoids water setup, splashback and slurry disposal.
- 24-inch rip and 18-inch diagonal capacity for tile layout work.
What's Included
- iQTS244 10-inch dry-cut tile saw.
- X-Stand.
- 10-inch Q-Drive combination blade.
Specifications
- Power supply: 120 V; 17 A total system
- Saw motor: 1.5 hp / 12 A
- Vacuum motor: 0.8 hp / 5 A
- Vacuum airflow: 92 CFM
- Saw weight: 93 lb
- Saw dimensions: 27 in W × 34 in L × 28 in H
- Stand dimensions: 18 in W × 28 in L × 20 in H
- Blade: 10 in Q-Drive
- Filter: iQ Dura Bond cartridge
- Rip / diagonal capacity: 24 in / 18 in
- Cutting depth: 1 in
- Dust capacity: 11 lb; described as over 500 linear ft when cutting 3/8-inch material
Applications
Use for tile-installation cutting where dry pieces and reduced water cleanup help the workflow. Match the blade to ceramic, porcelain, marble or stone and check the piece against both the rip/diagonal capacity and the 1-inch depth limit.
Selection and Use
- Provide an electrical supply appropriate for the 17-amp total system draw.
- Allow room around the saw and stand for the tile being cut and supported.
- Use the specified Q-Drive blade rather than assuming any 10-inch blade will mount correctly.
- Maintain dust collection throughout cutting. The stated capture percentage does not mean that no dust is released or replace the jobsite’s required dust controls and protective equipment.
