Description
Overview
Gemini 1032 is the Taurus 3 water-tub replacement. It forms the saw’s water reservoir and receives the removable saw head and work surface for bench operation.
Features
- Model-specific reservoir with water-level reference.
- Removable saw head supports the Taurus 3’s bench/handheld configuration.
- Accessible tub for draining and cleaning cutting residue.
Specifications
- Part: 1032
- Saw: Gemini Taurus 3
- Component: Main water tub / reservoir
- Matching setup: Taurus 3 saw head and work surface
Applications
Replace a cracked or leaking Taurus 3 tub so the bench setup can retain its operating water. Correct water level and regular cleaning matter more than simply topping up a dirty bath.
Selection and Use
- Fill to the marked water level and follow the Taurus 3 manual’s installation sequence.
- Ensure the saw is seated at the bottom mount and its rear clip engages the tub.
- Drain and clean accumulated cutting residue after use.
- Removing the head for handheld use does not remove the requirement to use the stabilizer foot.
