Description
Overview
The Gemini Super Slicer 1047 guides repeated, parallel slices through rods, pattern bars, streamers and millefiori. Material attaches to a ram that travels along a base, helping control thin slices instead of feeding each one freehand.
Features
- Designed for repetitive slices as thin as 1/16 inch.
- Base includes removable pins for gridded or flat work surfaces.
- Tape and size-coded rubber bands hold the work to the ram.
What's Included
- Material-holding ram.
- Base with two removable pins.
- Double-sided tape strips.
- Color-coded rubber bands.
Specifications
- Part: 1047
- Taurus 3 throat height: 1-1/2 in.
- Taurus II.2 throat height: 1 in.
- Other saws: Usable only where the blade clears the base ribs and the material clears the throat
Applications
Use the Super Slicer for repeatable wafers from glass rods and pattern bars, or other repetitive slicing within the saw’s clearance and blade capability.
Selection and Use
- Check both material height and blade clearance at the ribs before choosing a setup.
- Gemini recommends its Slicer blade for thin-kerf work with this jig; the blade and saw are separate from these jig components.
- Attach material to the ram with the supplied tape; rubber bands can provide additional support.
