Diatex Grescut Bridge Saw Blade

Overview

The Diatex GREScut Silent Core bridge-saw blade is designed for porcelain slabs. Its sandwich-style diamond segments help maintain a square cutting edge, while the steel core supports stable straight and miter cutting.

Features

• Porcelain-focused diamond matrix.
• Silent-core design and laser-cut reliefs help manage vibration and blade stress.
• Sandwich segments resist edge rounding and blade drift.

Specifications

• Use: Wet bridge-saw cutting only
• Sizes: 14 or 16 in., as selected
• Style: Segmented / J-slot
• Segment height: 10 mm
• Bore: 60 / 50 mm

Size Options

• 14"
• 16"

Diameter-Specific Speed Guidance

• 14-inch class / Ø360 mm in data sheet: 2,150–2,500 RPM
• 16-inch class / Ø410 mm in data sheet: 1,900–2,200 RPM

Feed Guidance by Porcelain Thickness

• 3–4.9 mm: straight and miter, 1.5–1.8 m/min.
• 5–9 mm: straight and miter, 1.2–1.5 m/min.
• 10–12 mm: straight, 1.0–1.2 m/min; miter, 0.6–0.7 m/min.
• 13–20 mm: straight, 0.6–1.0 m/min; miter, 0.4–0.6 m/min.

Downloads

• Diatex Grescut Bridge Saw Blade Data Sheet

Applications

Use for wet fabrication of porcelain slabs and tiles, including straight cuts and 45° miters. Match the settings to both blade diameter and slab thickness; a single broad RPM range is not appropriate for both sizes.

Selection and Use

• Use the diameter-specific RPM and thickness-specific feed guidance in the Specifications tab.
• The data sheet recommends reducing feed speed by 40–50% while entering and exiting the cut.
• Provide water at the blade/material contact area and support the slab according to the saw and material instructions.
• The published feed values are setup guidance, not a guarantee of a chip-free edge on every slab.