Description
Overview
The Cyclone MVG60 is a 6-inch pneumatic air grinder for wet work. It combines a water-fed guard for cutting with internal water delivery for coring and grinding, giving fabricators distinct water-feed arrangements for different operations.
Features
- 6-inch guard with water feed and shut-off valve.
- Internal water feed for coring and grinding.
- Push-connect air and water connections.
- Automatic oil injection system.
Specifications
- Model: MVG60
- Maximum speed: 10,000 RPM
- Air requirement: 16 CFM at 90 PSI
- Guard size: 6 inches
- Operation: Wet
Applications
Use the grinder for wet cutting, grinding or coring with tooling appropriate to the material and operation. Plan both the compressed-air supply and water connection before adding it to a fabrication station.
Selection and Use
- The stated air requirement is 16 CFM at 90 PSI; compare this with the available supply rather than pressure alone.
- Use the guard water feed for cutting and the internal-feed arrangement for compatible coring or grinding tooling.
- Match each accessory’s speed rating and fitting to the grinder; the tool’s 10,000 RPM maximum is not an operating recommendation for every accessory.
