Description
Overview
ARDEX FEATHER FINISH creates a smooth, feathered transition over prepared interior substrates before flooring is installed. Its hydraulic-cement blend mixes with water and is applied by trowel, making it useful for surface irregularities and finishing work.
Specifications
- Package: 10 lb bag
- Color: Gray
- Mixing water: 2.5 qt per bag; small batches 2 parts powder to 1 part water by volume
- Approximate coverage: 33.3 sq ft at 1/8 in.; 16.7 sq ft at 1/4 in.; 100–300 sq ft as a skimcoat
- Flooring installation: Approximately 15–20 minutes at 70°F (21°C), subject to installation requirements
- Use: Interior only
Applications
For preparing compatible substrates beneath floor coverings such as sheet vinyl and VCT. Coverage depends on texture and depth. Check substrate preparation and any primer requirements in the ARDEX technical data before mixing.
This is a finishing underlayment intended to receive flooring. Choose a designated topping for an exposed finished floor, and use a compatible moisture-control system when the slab requires one.