Description
Overview
Aqua Mix Sealer’s Choice Gold PFAS-Free is a water-based penetrating sealer for porous natural stone, tile and grout. It provides stain resistance with a natural, no-sheen appearance on most surfaces, rather than a topical finish.
Features
- Formulated without PFAS (per- and polyfluoroalkyl substances).
- Allows moisture vapor transmission.
- For interior and exterior work, including pre-grouting sealing.
- Maximum stain resistance for up to 1 hour of exposure; clean spills promptly.
- Protection for up to 10 years under natural exposure and routine wear.
Specifications
- Finish: Natural look; no sheen
- Coverage basis: Estimated area for two coats; varies with porosity, installation practices and jobsite conditions
- Pint coverage: 25–100 sq. ft.
- 24 oz. coverage: 35–150 sq. ft. (manufacturer reference size)
- Quart coverage: 50–200 sq. ft.
- Gallon coverage: 200–800 sq. ft.
- 5 gallon coverage: 1,000–4,000 sq. ft.
- 55 gallon coverage: 11,000–44,000 sq. ft.
Size Options
- Quart
- Gallon
- 5 Gallon
- 55 Gallon Drum
- Pint
Downloads
Applications
Use to seal most porous natural stone, tile and grout on suitable countertops, backsplashes, floors, walls, showers and interior or exterior stonework. Always test a less-visible area: light-colored and polished stone can show residue if the sealer is not removed properly.
Selection and Use
- Apply to a clean, dry surface free of waxes, sealers and finishes. Allow new adhesives and grout to dry at least 48 hours; apply at 50–90°F ambient temperature.
- Shake and apply a liberal coat. Work it into dense, polished or honed surfaces with a white nylon pad. Let it penetrate up to 5 minutes or until drying starts.
- Wipe with a damp microfiber towel, then buff dry. Apply a second coat after at least 30 minutes using the same procedure.
- Allow light foot traffic only 30 minutes after the final dry buff. Keep dry for 24 hours; maximum stain protection develops after 24 hours.
- Does not prevent wear or acid/caustic etching. Clean with a suitable neutral-pH cleaner; harsh chemicals, high-alkaline cleaners and steam can shorten protection.
- Use impervious gloves and eye protection, ventilate the area and follow the label.
