Aqua Mix Sealer & Coating Remover

Aqua Mix
SKU:
30.58400
MPN:
010262-4
$24.91
(7 reviews)
Current Stock:
Adding to cart… The item has been added

Aqua Mix Sealer & Coating Remover

Aqua Mix Sealer & Coating Remover is a non-flammable, multi-purpose stripper formulated to stay wet longer which gives the product time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives, and paints. It's ideal for dissolving deep-set stains and removing heavy grease buildup.

Aqua Mix Sealer & Coating Remover is ideal for use on natural stone (such as granite, limestone, marble, slate, and travertine), ceramic, porcelain, grout, quarry, saltillo, terra cotta, cement pavers, and masonry surfaces.


Coverage

Aqua Mix Sealer & Coating Remover covers approximately 75 to 200 sq. ft. per gallon.


Stripping:

1) Read entire label before using.

2) SHAKE WELL before using.

3) Sweep or vacuum surface.

4) Apply a liberal amount of Sealer & Coating Remover to a small manageable area of up to 25 sq. ft.

5) Spread with a mop, sponge, or brush.

6) Allow product to dwell up to 1 hour without drying or until coating or residue softens. Do not allow Sealer & Coating Remover to dry on surface - if Remover starts to dry, add more to ensure surface is kept wet.

7) Agitate with a scrub brush or scrub machine.

8) Wipe up residue with clean, absorbent white cotton towels or sponge. A wet-dry vac may be used.

9) Removal of thick coatings or residue may require several applications - repeat steps 3 through 7 if coating is still on surface.

10) Rinse thoroughly with clean water.

11) Ready for surface traffic in 1 hour or after fumes have dissipated. Allow at least 24-hour drying time before applying AQUA MIX sealers and floor finishes.


Epoxy Grout Haze Removal:

1) Read entire label before using.

2) SHAKE WELL before using.

3) Apply a minimal amount of Sealer & Coating Remover (just enough to make the surface damp) to a small manageable area of up to 25 sq. ft. (2 m2).

4) Spread with a mop, sponge, or brush.

5) Lightly agitate surface with a scrub brush until haze is removed. For large commercial installations, a white pad may be used with a scrub machine.

6) Mop up dirty solution.

7) Rinse thoroughly with clean water.

8) Ready for surface traffic in 1 hour or after fumes have dissipated. Allow at least 24-hour drying time before applying AQUA MIX sealers and floor finishes.


Limitations:

  • Do not allow product to come in contact with any non-recommended surface.
  • Do not spray. Do not use on resinous synthetic agglomerates.



Aqua Mix Sealer & Coating Remover Technical Data Sheet

Aqua Mix Sealer & Coating Remover Safety Data Sheet

30.58400:
010262-4
30.00108:
010263

Reviews

  • 5
    Great Purchase!

    Posted by Kimberly Sandifer

    Received my purchase within a couple of days of ordering. Haven’t used it yet but was pleased with how quickly everything went and with how well the transaction went. I recommend this company highly.

  • 5
    coating remover

    Posted by frank ruvalcaba

    Product was available at fair price. Order was shipped within a reasonable time. Very happy with this experience

  • 5
    Sealer and coating remover

    Posted by Unknown

    This product works great. We have used it a few times for epoxy haze removal and it works fantastic

  • 5
    This one works!

    Posted by Cheryl Wilfong

    I've tried 5 different strippers during the past 20 years. This one actually works

  • 4
    health friendly remover

    Posted by Unknown

    I have brick pavers with sanded grout on my kitchen floor. The initial sealer with applied too thick with a box-store type of acrylic coating. The result left the grout blotchy and cloudy. The remover was not able to remove everything from the grout, but greatly improved the appearance.