Description
Overview
Alpha Vetro is a continuous-rim diamond blade for wet cutting glass and glass tile. Its fine diamond matrix and glass-specific bond help produce clean edges with minimal chipping, including cuts close to an edge.
Features
- Smooth continuous rim for straight, true cuts.
- Suitable for plunge cuts, edge trimming and internal-radius cutting.
- The fine diamond matrix also cuts onyx.
Specifications
- Cutting method: Wet only
Size Options
- 4-3/8"
- 7"
- 10"
WG0438
- Size: 4-3/8"
- Thickness: 1.0mm
- Max RPM: 13,200
- Arbor(s): 7/8", 20mm
- For Use On: Stone Cutter
WG0700
- Size: 7"
- Thickness: 1.6mm
- Max RPM: 8,400
- Arbor(s): 5/8"
- For Use On: Tile Saw
WG1000
- Size: 10"
- Thickness: 1.6mm
- Max RPM: 5,900
- Arbor(s): 5/8"
- For Use On: Tile Saw
Downloads
- Alpha Vetro Glass Blades Safety Data Sheet
- Alpha Vetro Glass Blades How to Use
- Alpha Vetro Glass Blades Helpful Hints
- Alpha Blade Selection Guide
- Alpha Vetro Glass Blade Flyer
- Alpha Vetro Glass Blade & PVA Polisher Flyer
- Alpha Cutting System Overview
Applications
Choose Vetro for glass-tile installation or glass fabrication where edge quality matters. The 4-3/8-inch WG0438 fits the Alpha AWS-110 wet stone cutter for portable work; the 7- and 10-inch versions are listed for tile saws.
Selection and Use
- Match blade diameter, arbor and maximum RPM to the machine using the model specifications.
- Use a slow, consistent feed rather than forcing the blade. Alpha’s linked instructions explain how this helps minimize edge chipping.
- Keep the cut wet and follow the power tool’s operating instructions.
