Description
Overview
Alpha Porcellana is a wet-only diamond blade formulated for dense porcelain tile and slab. Its continuous rim and diamond matrix are designed to produce clean cuts with minimal chipping, with smaller sizes for portable stone cutters and larger sizes for tile saws.
Features
- Cuts porcelain plus granite, marble, engineered stone, travertine and ceramic tile.
- The 8- and 10-inch blades have a 10 mm continuous diamond rim.
- Designed to avoid routine re-dressing when properly used.
Specifications
- Cutting method: Wet only
Size Options
- 4-3/8"
- 5"
- 7"
- 8"
- 10"
PT04A+
- Size: 4-3/8"
- Thickness: 1.4mm
- Maximum RPM: 13,200
- Arbor(s): 7/8" - 20mm
- Wet / Dry Use: Wet Only
- For Use On: Stone Cutter/Angle Grinder
PT05S
- Size: 5"
- Thickness: 1.4mm
- Maximum RPM: 12,200
- Arbor(s): 7/8"
- Wet / Dry Use: Wet Only
- For Use On: Stone Cutter/Angle Grinder
PT07A+
- Size: 7"
- Thickness: 1.6mm
- Maximum RPM: 8,400
- Arbor(s): 5/8"
- Wet / Dry Use: Wet Only
- For Use On: Tile Saw
PT08A+
- Size: 8"
- Thickness: 1.6mm
- Maximum RPM: 7,400
- Arbor(s): 5/8"
- Wet / Dry Use: Wet Only
- For Use On: Tile Saw
PT10A+
- Size: 10"
- Thickness: 1.6mm
- Maximum RPM: 5,900
- Arbor(s): 5/8"
- Wet / Dry Use: Wet Only
- For Use On: Tile Saw
Downloads
- Alpha Porcellana Blade Flyer
- Alpha Porcellan Blade Helpful Hints
- Alpha Blades Overview Chart
- Alpha Blade Selection Guide
Applications
Use Porcellana when wet cutting porcelain tile or slab and other listed tile materials. The 4-3/8-inch and 5-inch versions support portable work with the AWS-110 and AWS-125 respectively; the 7-, 8- and 10-inch entries are specified for tile saws.
Selection and Use
- Select by machine, arbor and blade diameter, not material alone. Maximum RPM and thickness vary by size.
- Use water throughout the cut. This is not a dry-cutting alternative to Katana.
- The 10 mm rim claim applies to the 8- and 10-inch blades; it is not a universal specification for every size.
