Description
Overview
Alpha GCW358 is a wet-use groove cutter for preparing joint-seaming grooves in granite and engineered-stone countertops. It is designed around 1-1/4-inch (3 cm) slabs and mounts with a 5/8-inch-11 thread.
Features
- 7.5 mm cutting thickness.
- For groove preparation at countertop joints.
- Wet-use design for a compatible cutting setup.
Specifications
GCW358
- Thickness: 7.5mm
- Max RPM: 14,500
- Recommended For: 1-1/4" Slab
- Thread: 5/8"-11
- For Use On: Granite
Downloads
Applications
Use the Groove Cutter to prepare the specified grooves for seaming 3 cm countertop material. The 1-1/4-inch description identifies the intended slab thickness, not the blade’s cutting thickness.
Selection and Use
- Check the 5/8-inch-11 mount and 14,500 RPM maximum against the tool.
- The setup requires an appropriate safety guard, water-feed system and GFCI; these are optional setup accessories, not stated kit contents.
- Joint strength depends on the complete seaming method. This cutter alone does not guarantee a strongest or flawless joint.
