Description
Overview
Tuscan Wing Straps are designed for ungauged tile with up to a 2 mm thickness difference. Used with the traditional system’s caps and installation gun, the winged base helps bring neighboring tile faces into alignment while the mortar cures.
Features
- Winged strap geometry for the stated thickness variation.
- Helps hold adjacent tile edges during cure.
- System has listed TCNA Robinson compression-test performance.
What's Included
- Selected quantity of Wing Straps
Quantities, edge counts and the worked example are reproduced from the displayed reference chart. Parenthesized inch values in the final column identify the tile edge. The printed example rounds the product 144 x 2.3 to 331; no arithmetic or ordering recommendation has been substituted.
| TILE SIZE | Recommended quantity per sq.ft. | Straps & Caps OR SeamClip per side |
|---|---|---|
| 12″ x 12″ (305 x 305 mm) | 4 / Sq. ft. | 2 |
| 13″ x 13″ (330 x 330 mm) | 3.5 / Sq. ft. | 2 |
| 14″ x 14″ (356 x 356 mm) | 3 / Sq. ft. | 2 |
| 16″ x 16″ (406 x 406 mm) | 2.3 / Sq. ft. | 2 |
| 18″ x 18″ (457 x 457 mm) | 1.8 / Sq. ft. | 2 |
| 20″ x 20″ (508 x 508 mm) | 1.5 / Sq. ft. | 2 |
| 24″ x 24″ (610 x 610 mm) | 1 / Sq. ft. | 2 |
| 24″ x 24″ (610 x 610 mm), Marble / Flexible Tiles | 1.5 / Sq. ft. | 3 |
| 30″ x 30″ (762 x 762 mm) | 1 / Sq. ft. | 3 |
| 36″ x 36″ (914 x 914 mm) | 1 / Sq. ft. | 4 |
| 6″ x 12″ (152 x 305 mm) | 6 / Sq. ft. | (6″) 0 / (12″) 3 |
| 6″ x 18″ (152 x 457 mm) | 4 / Sq. ft. | (6″) 0 / (18″) 3 |
| 6″ x 24″ (152 x 610 mm) | 3 / Sq. ft. | (6″) 0 / (24″) 3 |
| 12″ x 24″ (305 x 610 mm) | 2 / Sq. ft. | (12″) 2 / (24″) 2 |
| 12″ x 36″ (305 x 914 mm) | 1.7 / Sq. ft. | (12″) 2 / (36″) 3 |
| 24″ x 48″ (610 x 1219 mm) | 1 / Sq. ft. | (24″) 3 / (48″) 5 |
Example using equation for above chart:
Square feet of area x recommended qty. per square foot
Room = 144 square feet. Using 16″ x 16″ tiles.
144 x 2.3 = 331 straps & caps.
Above figures are estimates only, tiles which are more flexible may require more straps per tile side to keep level with adjoining tiles.
06/2014
Specifications
- Thickness difference: Up to 2 mm between ungauged tiles
- Minimum system joint: 1/32 in.
- Recommended tile size: 12 in. or larger
- Packages: 500 or 1,000 Wing Straps
Size Options
- 500 Wing Straps
- 1,000 Wing Straps
Downloads
Applications
Select Wing Straps when variation in tile thickness makes the regular uniform-thickness strap unsuitable. They are part of the strap-and-cap system, not the one-piece SeamClip range.
Selection and Use
- Soak before first use only: 30 minutes in hot water, 2–3 hours in warm water, or overnight at room temperature, as directed in the installation guide.
- The guide recommends a 1/2-inch or larger notched trowel for Wing Straps. Follow the mortar instructions and back-butter the tile.
- Place along tile edges rather than at corners, clear excess mortar from the strap and allow the setting material to cure before removal.
- Use at 50°F or above after soaking; do not use frozen or pre-bend the straps.